Laptop Keeps Disconnecting from Wi-Fi? Solution Is Here

One of the problems faced by many users after upgrading to Windows 10 or after updates, before proceeding to the solution of Windows 10 Wifi disconnection; Let’s also give information about what may be caused by the problem. This issue usually occurs after updates.

After the update, the computer’s WIFI is turned on, but your connection starts to disconnect every 1-2 minutes. While these disconnection occur, test the WiFi from the phone or another device, if your other devices do not have a disconnection problem and only your computer has a problem, we can move on to the heading below named Solution to Windows 10 Wifi disconnection problem.

wifi keeps disconnecting

Solution to Windows 10 Wifi Disconnect

There are 2 different solutions to the problem, we recommend that you first check if your network card is up to date.

To check if your network profit is up to date;

Click Start, type device manager in the search box, then select Device Manager.
Then click on Network Adapters from the categories and right-click on the drop-down menu items one by one and click Update Driver.
Select Search automatically for updated driver software.
Select Update Driver.
If your Windows driver is up to date, we can proceed with the other steps.
Also, follow the Control Panel> System and Security> System> Device Manager directory and go to the Network Adapters category. Right click on your network devices in this category and from the Properties option, go to the Power Management heading. If the “Let the computer turn off this device to save power” option is ticked, uncheck this and save it.

After doing these procedures, turn your computer off and on again. If the problem still persists, follow the steps below one by one.

Solving Wifi Disconnect Problem with CMD

Start by typing cmd, right click and run as administrator and enter the following commands in order:

1. netsh int ip reset a.txt (Type the command and press ENTER. Confirm that some partitions are reset and it says OK.)

This command will allow you to reset the TCP / IP field.

2. netsh winsock reset (Type the command and press ENTER. Confirm some partitions are reset and says OK in return.)

This command will enable you to reset the Winsock catalog.

3.netsh winhttp reset proxy (Type the command and press ENTER.)

This command will allow you to reset any proxy you are using on your computer.

4. netsh advfirewall reset (Type the command and press ENTER.)

This command will enable you to reset the Network firewall.

5.ipconfig / flushdns (Type the command and press ENTER.)

With this command, you clear DNS caches.

Also read: How to Fix Laptop Screen Flickering

Leave a Reply

Your email address will not be published. Required fields are marked *